The Citroen C3 Picasso MPV was manufactured from 2009 to 2017. In this article you will find the Citroen C3 Picasso 2009, 2010, 2011, 2012, 2013, 2014, 2015 and 2016 fuse box outline, information about the location of the fuse boxes inside the car and the allocation of each fuse (fuse layout).
The fuse for the cigar lighter (socket) in the Citroen C3 Picasso is fuse F9 in the instrument panel fuse box.
Dashboard fuse box
Fuse box location
Left-hand drive vehicles: the fusebox is placed in the lower dashboard (left-hand side).
Unclip the cover by pulling on the side, remove the cover completely.
Right-hand drive vehicles: the fusebox is located in the glove box.
Open the glove box, unclip the cover by pulling on the side, remove the cover completely.
Fuse box diagram
Assignment of the fuses in the Dashboard Fuse box
N° | Rating | Functions |
---|---|---|
F1 | 15 A | Rear wiper. |
F2 | – | Not used. |
F3 | 5 A | Airbags and pretensioners control unit. |
F4 | 10 A | Steering wheel angle sensor, air conditioning, clutch switch, particle filter pump, diagnostic socket, airflow meter. |
F5 | 30 A | Electric window switch panel, passenger’s electric window control, front electric window motor. |
F6 | 30 A | Rear electric window motor and driver’s electric window motor. |
F7 | 5 A | Courtesy and front map reading lamps, glove box lighting, torch, rear reading lamps. |
F8 | 20 A | Multifunction screen, audio system, navigation radio. |
F9 | 30 A | Audio system (aftermarket), 12 V socket. |
F10 | 15 A | Steering wheel controls. |
F11 | 15 A | Ignition, diagnostic socket. |
F12 | 15 A | Rain / sunshine sensor, trailer relay unit. |
F13 | 5 A | Main stop switch, engine relay unit. |
F14 | 15 A | Parking assistance control unit, seat belt unfastened warning lamp, airbag control unit, instrument panel, air conditioning, USB Box. |
F15 | 30 A | Locking. |
F16 | – | Not used. |
F17 | 40 A | Rear screen and door mirrors demist/defrost. |
SH | – | PARC shunt. |
FH36 | 5 A | Trailer relay unit. |
FH37 | 15 A | Trailer accessories socket supply. |
FH38 | 20 A | Aftermarket navigation. |
FH39 | 20 A | Heated seats (except RHD) |
FH40 | 30 A | Trailer relay unit. |
Engine compartment fuse box
Fuse box location
It is located in the engine compartment near the battery (left-hand side).
Fuse box diagram
Assignment of the fuses in the Engine compartment
N° | Rating | Functions |
---|---|---|
F1 | 20 A | Engine control unit supply, cooling fan unit control, multifunction engine control main relay. |
F2 | 15 A | Horn. |
F3 | 10 A | Front / rear wash-wipe. |
F4 | 20 A | Daytime running lamps. |
F5 | 15 A | Diesel heater (Diesel engine), fuel pump (petrol engine) |
F6 | 10 A | ABS/ESP control unit, ABS/ESP cut-off relay, secondary stop switch. |
F7 | 10 A | Electric power steering. |
F8 | 25 A | Starter motor control. |
F9 | 10 A | Switching and protection unit (Diesel). |
F10 | 30 A | Diesel engine injection pump valve, injectors and ignition coils (petrol engine). |
F11 | 40 A | Air conditioning fan. |
F12 | 30 A | Windscreen wipers slow / fast speed. |
F13 | 40 A | Built-in systems interface supply (ignition positive). |
F14 | 30 A | Valvetronic supply (petrol). |
F15 | 10 A | Right-hand main beam headlamp. |
F16 | 10 A | Left-hand main beam headlamp. |
F17 | 15 A | Left-hand dipped beam headlamp. |
F18 | 15 A | Right-hand dipped beam headlamp. |
F19 | 15 A | Multifunction engine management supply (petrol engine), air cooling electrovalves (Diesel). |
F20 | 10 A | Multifunction engine management supply (petrol engine), Turbo pressure regulation electrovalve (Diesel), engine coolant level sensor (Diesel). |
F21 | 5 A | Fan assembly control supply, APC, ABS ESP relays. |
MF1* | 60 A | Cooling fan assembly. |
MF2* | 30 A | ABS / ESP control unit. |
MF3* | 30 A | ABS / ESP control unit. |
MF4* | 60 A | Built-in Systems Interface (BSI) supply. |
MF5* | 60 A | Built-in Systems Interface (BSI) supply. |
MF6* | – | Not used. |
MF7* | – | Passenger compartment fusebox. |
MF8* | – | Not used. |
* The maxi-fuses provide additional protection for the electrical systems. All work on the maxi-fuses must be carried out by a CITROËN dealer or a qualified workshop. |