The ZKE (Central Body Electronics) system in BMW vehicles is responsible for various functions relating to central locking, alarm systems and more. Like other systems in BMW vehicles, the ZKE system can experience faults and malfunctions that can be diagnosed using fault codes.
Our guide provides a comprehensive list of ZKE fault codes – BMW Fault Code Lists, including descriptions, causes and possible solutions. We cover all aspects of ZKE fault codes, including the different types of codes, how to read them using a scanner or by counting the number of flashes on the check engine light, and what each code means.
Our guide will help you diagnose and troubleshoot your BMW’s ZKE system with confidence. From identifying a faulty sensor to diagnosing a more complex problem with the system, understanding ZKE fault codes is an essential skill for any BMW owner.
It’s important to note that while fault codes can provide valuable insight into problems with your BMW’s ZKE system, they are not always 100% accurate. Sometimes several codes can be triggered at the same time, or a code may be triggered by a faulty sensor rather than an actual problem with the component. If you’re unsure about the problem with your BMW, it’s always best to consult a professional mechanic or BMW dealer.
In conclusion, understanding ZKE Fault Codes – BMW Fault Code Lists is an essential skill for any BMW owner experiencing problems with their vehicle’s central locking, alarm and more. With our comprehensive guide, you can confidently diagnose and rectify any problems with your BMW, keeping it in top condition for years to come.
ZKEII
15 Repeat lock has been activated!
No error!
62 No SUCH CODE
24 Power supply disconnected!
2 Pin contact power lock – passenger door actuator faulty
Check the connection to the power lock module circuit breaker and the connection to the pin contacts.
the connection to the pin contacts.
Is the mechanism working? (select power lock mode!)
11 Power lock relay stuck!
One of the relay contacts is stuck.
replaced!
13 CRASH sensor has been activated!
No fault!
26 Internal fault!
There is an internal fault. Please clear the fault memory
and lock the power door locks.
In the event of a malfunction and if the fault is still stored, the power lock module must be replaced!
module must be replaced!
28 Passenger door contact active for more than 16 minutes!
The door has been open for more than 16 minutes.
No fault! Please clear the fault memory!
ZKEIII
2 Data exchange, driver’s door module and GM : faulty
11 Sliding/tilting sunroof module : faulty
13 No SUCH CODE
15 Input signal, terminal R on general module : faulty
24 Windscreen wiper speed 1 relay : faulty
26 Washer pump relay faulty
62 Driver’s side closing relay fault : front power windows
ZKEIV
2 Fuse for ZV
11 Electrical load disconnection – short circuit or overload
13 Door lock heating, short circuit
15 Lock contact
24 ZV double locking relay not energised
26 Driver’s door FH relay not energised
28 Driver door FH relay not energised
62 ZV unlocking bar relay
ZKEV
2 Data exchange between driver’s door module and base module (GM) faulty
11 Sunroof power module faulty
13 No SUCH CODE
15 Incoming signal terminal R on base module (GM) faulty
24 Washer relay 1 faulty
26 Washer pump relay faulty
28 Windscreen pressure module faulty
62 Failure to select: Close driver’s side front electric window