Instruments and controls Mechanically operated main switches have only one switch outside the cab.3 D002104-23.4 TELEPHONE3.4.1 Telephone interface.
The telephone interface provides hands-free telephony either by connecting Bluetooth-enabled telephones or by activating the truck phone. See section ‘Installing and removing Bluetooth-enabled telephones’ or section ‘Activating the truck phone’. The telephone interface is fully functional when the ignition is switched on or at least in the accessory position.
When the ignition is switched off, active calls are supported if they were active before the ignition was switched off. When the ignition is switched off and the active call is ended, the phone interface no longer supports Bluetooth-enabled phones. However, the truck phone will continue to receive incoming phone calls and SMS messages for a period of 24 hours after the ignition is switched off.
| ERROR CODES | EXAPTATİON |
|---|---|
| 32512 | 31Phone interface not shut down properly |
| 32513 | 31Phone interface not shut down properly |
| 32514 | 31 Internal fault in telephone interface unit |
| 32515 | 31 Internal fault in telephone interface unit |
| 32516 | 31 Internal fault in telephone interface unit |
| 32517 | 31 No communication between phone interface and phone cradle not properly |
| 32518 | 3 Short circuit to power supply in the microphone |
| 32518 | 4 Short circuit to ground in the microphone |
| 32518 | 5 Microphone open circuit |
| 32519 | 3 Short to power in radio mute signal |
| 32519 | 4 Short to ground in radio mute signal |
| 32520 | 31 CAN signal (CCVS) message missing |
| 32521 | 31 CAN signal could not be transmitted |
| 32522 | 31 CAN message VIC missing |
