IVECO Truck EuroTronic Error Codes DTC Requiring Immediate Engine Shutdown
06 – short circuit to ground at the output Y6 (valve-switch 1/3 gear)
07 – short circuit to ground at the output Y7 (valve switch 2/4 gears)
10 – short circuit to ground at the output at Y10 (main valve)
38 – open circuit at the output of Y6 (valve switch 1/3 gear)
39 – open circuit at the output to Y7 (valve switch 2/4 gears)
42 – open circuit at the output to Y10 (main valve)
57 – no voltage on the emergency unit
77 – short circuit to positive at the output of the PTO1 power take-off
78 – short circuit to positive at the output of the PTO power take-off 2
82 – short to positive at the output of short-term clutch
83 – short to positive at the output of short-term clutch engagement
84 – short circuit to positive at the output of a long clutch
85 – short circuit to positive at the output of the clutch
90 – malfunction of the electronic control unit (communication)
114 – unintentional engagement of the clutch
170 – cutoff relay in the electronic unit does not turn on
Iveco EuroTronic. Error codes that can be read using the emergency unit.
22 – short circuit to ground in the power circuit of the shift lever, display, warning sound signal and speed sensor
54 – open circuit (see error 22)
91 – no signal from the switch sensor
92 – self-tuning error sensor selected gear
93 – error self-tuning sensor node switching range, the position of the gears of the lower range of the GPI
94 – error setting the divider in the low gear position
95 – self-tuning error of at least 2 gears
101 – speed error on both speed sensors (1 + 2)
105 – low voltage
109 – double error in the shift lever
110 – there is no communication between the shift lever and the control unit
117 – error in the process of setting the clutch
118 – clutch does not turn off
119 – clutch does not turn on, torque is not transmitted from the engine
147 – range switching unit does not turn on (GP)
150 – divider does not turn on (GV)
153 – the working cylinder of the switch does not turn on
154 – main gear does not turn off
155 – main gear does not turn on
156 – erroneous gear shift
166-constant idle signal (accelerator pedal)
167 – there is no information about the volume of injected fuel and the position of the accelerator pedal (malfunction of MUX at the input SDI)
169 – cutoff relay in the electronic control unit does not turn off
177 – error in data transmission (information is not transmitted to other systems controlled by the CAN line
181 – data transmission error (information is not transmitted between the engine control unit (EDC) and accelerator pedal
190 – error of the electronic control unit
191 – error of the electronic control unit
192 – error of the electronic control unit
