Blinker codes for IVECO trucks – ECAS

blinker codes for iveco trucks ecas

ELECTRONIC CONTROL UNIT MALFUNCTION CODE

Errors in memory 01

Error in calibration parameters of level sensors in memory 02

Error parameters in memory 03

Error in calibration parameters of pressure sensors in memory 07

Sample values for level sensors in memory 09

Memory Fault 04

Malfunction in the electronic control unit 06/08/80

Vehicle speed signal (open or short to + DC) 81

Level sensor malfunction: open or short circuit to + DC

Malfunction of the right back level sensor 10

Malfunction of the left back level sensor 11

Front Level Sensor Malfunction 12

Malfunction of pressure sensors: short circuit on + a direct current

Right rear pressure sensor malfunction 14

Left rear pressure sensor malfunction 15

Malfunction of the right third-axis pressure sensor / lift 16

Malfunction of the left pressure sensor of the third axis / lifting 17

Level Sensor Malfunction: Short to Ground

Malfunction of the right back level sensor 20

Left rear level sensor malfunction 21

Front Level Sensor Malfunction 22

Pressure sensor malfunction: open / short to ground

Right rear pressure sensor malfunction 24

Left rear pressure sensor malfunction 25

Malfunction of the right pressure sensor of the third axis / lifting 26

Malfunction of the left pressure sensor of the third axis / lifting 27

FLASHING TABLE OF ELECTRONIC CONTROL UNIT 0.49 “ECAS” 6X2 P / FP 6X2 C

Relay / solenoid malfunction: Short circuit to + DC

Inlet / outlet solenoid valve malfunction 30

Left rear solenoid valve malfunction 31

Malfunction of the right back electrovalve 32

Malfunction of the left third-axis solenoid valve / lift 33

Malfunction of the right third-axis electrovalve / lift 34

Front valve malfunction 36

Malfunction of the third axle lift control relay 37

Hydraulic pump control relay malfunction 38

Relay / Solenoid Malfunction: Short to Ground Code Output

Inlet / outlet electrovalve 40 15

Left rear solenoid valve malfunction 41 13

Malfunction of the right back electrovalve 42 31

Malfunction of the left solenoid valve of the third axis / lifting 43 12

Third axle right solenoid valve / lift failure 44 30

Front solenoid valve 46 11

Third axle lift control relay malfunction 47 14

Faulty hydraulic pump control relay 48 32

Incompatibility of lifting the frame and filling the pillows

Faulty right rear level sensor 50 8

Faulty left rear level sensor 51 25

Front level sensor malfunction 52 26

Faulty right axle pressure sensor 56 23

Faulty left axle pressure sensor 57 7

Incompatibility of lowering the frame and bleeding air from the pillows

Faulty right rear level sensor 60 8

Faulty left rear level sensor 61 25

Front level sensor malfunction 62 26

Faulty right rear pressure sensor 64 23

Left rear pressure sensor malfunction 65 7

Malfunction of the right third-axis pressure sensor / lift 66 5

Malfunction of the left third axis pressure sensor / lift 67 6

TABLE OF FLASHING CODES OF ELECTRONIC CONTROL UNIT 0.27 “ECAS” 4X2 / 6X2 ” IVECO

FAULT TYPE – FAULT CODE

Error in the configuration parameters of the electronic control unit 01

Calibration parameter error 02

Internal memory malfunction 03/04

Sample values for level sensors 06

Right rear level sensor

Open / Short to Plus 10

Short to ground 14

Incompatibility of signals when lifting the frame 40

Incompatibility of signals when lowering the frame 44

Left rear level sensor

Open / Short to Plus 11

Short to ground 15

Incompatibility of signals when lifting the frame 41

Incompatibility of signals when lowering the frame 45

Front level sensor

Open / Short to Plus 12

Short to ground 16

Incompatibility of signals when lifting the frame 42

Incompatibility of signals when lowering the frame 46

Inlet / outlet solenoid valve

Open / Short to Plus 20

Short to ground 30

Front solenoid valve

Open / Short to Plus 23

Short to ground 33

Right rear solenoid valve

Open / Short to Plus 22

Short to ground 32

Left rear solenoid valve

Open / Short to Plus 21

Short to ground 31